FCI

$20.00
Power Signal Standard for Spring-Diaphragm Actuated Control Valves Fluid Controls Institute / 1990 / 6 pages This standard establishes a standardized signal range capable of operating control valves equipped with spring opposed diaphragm actuators Keywords: power signal, spring diaphragm, actuated
$30.00
Back Pressure Regulator Capacity Fluid Controls Institute / 01-Jan-2007 / 9 pages This standard provides a method for establishing and reporting back pressure regulator capacities for use by manufacturers, users, specifiers and approval bodies in order to promote consistent presentation of back pressure regulator or surplusing valve capacities. Keywords: back pressure, regulators, capacity
$30.00
Pressure Regulator Hydrostatic Shell Test Method Fluid Controls Institute / 01-Jan-2007 / 7 pages SCOPE a. This standard establishes a method for conducting hydrostatic shell testing of pressure regulators having bodies, bonnets, and spring cases manufactured from any materials. b. This standard covers the hydrostatic testing of pressure boundary parts, as components, and regulators that are in an assembled state, for use by manufacturers, users, specifiers and approval bodies to validate...
$25.00
Classification and Operating Principles of Steam Traps Fluid Controls Institute / 01-Dec-2009 / 15 pages This standard is for the purpose of establishing and illustrating various classifications of Steam Traps in accordance with their basic principles of operation. This standard does not attempt to define details of conception or construction. Keywords: operating principles, steam traps
$25.00
Standard for Proof of Pressure Ratings for Pressure Regulators Fluid Controls Institute / 01-Dec-2009 / 9 pages 1. SCOPE 1.1 This standard describes the recommended proof testing of pressure regulators for operation at or below the manufacturer's rated pressure. 1.2 The purpose of this standard is to create common guidelines for establishing pressure ratings for use by manufacturers, users, specifiers and approval bodies in order to provide consistent pressure containment integrity....
$30.00
Standard for Qualification of Control Valve Stem Seals Fluid Controls Institute / 01-Oct-2010 / 15 pages This standard shall apply to rotary and linear motion control valves. Bellows, diaphragms and tubular stem seals are not covered by this standard. This standard shall not apply to valves that are governed by conflicting national or international standards. Municipal, state and federal regulations may require additional qualifications testing that is beyond the scope of this standard. The...
$78.75
Control Valve Seat Leakage / Regulator Seat Leakage Set - SAVE 10% Fluid Controls Institute / 01-Apr-2006 Order this important seat leakage set and save 10% on FCI 70-2-2006 and 70-3-2004 FCI 70-2-2006: This standard establishes six classes of seat leakage for control valves. Also defined are specific test procedures to determine the appropriate class. Included are classes commonly associated with double-port, double-seat or balanced single-port control valves with a piston ring seal or...
$62.50
Control Valve Seat Leakage Fluid Controls Institute / 01-Apr-2006 / 9 pages It is strongly recommended that users of FCI 70-2 also obtain a copy of FCI 70-3 Order 70-2 as a set with 70-3 and save 10%! This standard establishes six classes of seat leakage for control valves. Also defined are specific test procedures to determine the appropriate class. Included are classes commonly associated with double-port, double-seat or balanced single-port control valves with a piston ring seal or...
$25.00
Standard for Performance Testing of Secondary Pressure Drainers Fluid Controls Institute / 9 pages This standard specifies performance tests that are considered to be applicable to secondary pressure drainers. These tests may be conducted to evaluate the performance of a particular design, either currently in production or under consideration for production. Keywords: performance, secondary pressure drainers
$20.00
Standard for Proof of Pressure Ratings for Temperature Regulators Fluid Controls Institute / 7 pages This standard describes the recommended proof testing of temperature regulators with ratings up to a maximum of 1500 psi (10350 kPa) at 100°F (38°C) to ensure operation at or below the manufacturer's rated pressure. Sizes from 1/4 inch NPS up to 8 inches are covered by this standard. The purpose of this standard is to create common guidelines for establishing pressure ratings for...
$25.00
Standard for Solenoid Valve Seat Leakage Fluid Controls Institute / 9 pages Selection of a leakage class is not restricted as to valve design but valves of various commercially available designs and types of sealing materials are suggested. This standard cannot be used as a basis for predicting seat leakage at conditions other than those specified. This standard does not apply to valves normally used on high and ultra high vacuum (10-3 Torr or higher). This standard is not intended to...
$25.00
Standard Solenoid Valve Terminology and Nomenclature Fluid Controls Institute / 23 pages A standard that identifies and defines the basic methods of operation, types and functionality assoicated with most 2 and 3 way solenoid valves Keywords: Terminology and Nomenclature
$25.00
Recommended Methods for Testing and Classifying the Water Hammer Characteristics of Electrically Operated Valves Fluid Controls Institute / 11 pages A standard defining the valve flow coefficient Cv commonly used for the purpose of calculating valve flow capacity of leakage in metric terminology Keywords: Solenoid,valve,water hammer
$20.00
Metric Definition of the Valve Flow Coefficient Cv Fluid Controls Institute / 6 pages A standard defining the valve flow coefficient, Cv, commonly used for the purpose of calculating valve flow capacity or leakage in metric terminology. Keywords: metric, valve flow coefficient
$25.00
Pressure Rating Standards for Pipeline Strainers Other Than "Y" Type Fluid Controls Institute / 9 pages A standard defining uniform methods for design, rating and testing of pipeline straineirs other than "Y" type Keywords: pressure,Y type strainer
$25.00
Standard Terminology and Definition for Filled Thermal Systems for Remote Sensing Temperature Regulators Fluid Controls Institute / 13 pages Standard Terminology and Definition for Filled Thermal Systems for Remote Sensing Temperature Regulators Keywords: filled, thermal, remote, sensing, regulators
$25.00
Standard for Production Testing of Secondary Pressure Drainers Fluid Controls Institute / 7 pages This standard specifies production tests that are considered applicable to secondary pressure drainers. These tests may be conducted to ensure the correct functioning of either: 1) complete secondary pressure drainers or 2) the operating mechanisms thereof. Keywords: production, testing, secondary pressure drainers
$25.00
Standard for Production Testing for Steam Traps Fluid Controls Institute / 14 pages A standard to assist manufacturers, users, and specifiers of the product to comply with production and performance characteristics of automatic steam traps Keywords: production testing, steam traps
$25.00
Test Condiitons and Procedures for Measuring Electrical Characteristics of Solenoid Valves Fluid Controls Institute / 13 pages A guide for manufacturers, users, or others interested in test conditions and procedures for measuring electrical characteristics of solenoid valves Keywords: test, electrical, solenoid valves
$25.00
Pressure Rating Standard for "Y" Type Stainers Fluid Controls Institute / 9 pages This standard provides the minimum requirements for the design, fabrication, pressure rating, marking and testing of pressure containing housings for "Y" Type Strainers for use with pipe conforming to dimensions specified in ANSI B 36.10 and ANSI B 36.19. Certain standards and specifications are specifically incorporated by reference into this standard. However, it is not considered...